ChemBK
  • Home
  • Product Category


ACIDIFIED CLEAR WATER

2-Methoxyethanol

CAS: 109-86-4

Molecular Formula: C3H8O2

  1. Home
  2. Product Category
  3. Organic raw materials
  4. Ether compounds
  5. ACIDIFIED CLEAR WATER

ACIDIFIED CLEAR WATER - Names and Identifiers

Name 2-Methoxyethanol
Synonyms EM
2ME
EGM
MECS
EGME
Ektasolve
Dowanol Em
Jeffersol Em
METHYL OXITOL
METHOXYETHANOL
Methyl Ethoxol
Glycol Ether Em
1-methoxyethanol
2-Methoxyethanol
METHYLCELLUSOLVE
2-METHOXYETHANOL
Glycomethyl Ether
Methyl Cellosolve
METHYL CELLOSOLVE
Methoxyethanol, 2-
Methyl 'Cellosolve'
Methoxyhydroxyethane
METHOXYHYDROXYETHANE
METHYL CELLOSOLVE(R)
ACIDIFIED CLEAR WATER
Glycol Monomethyl Ether
Ethylene Glycol Methyl Ether
Ethylene Glycol Monomethyl Ether
Ethylene Glycol Mono Methyl Ether
CAS 109-86-4
EINECS 231-791-2
InChI InChI=1/C3H8O2/c1-3(5)2-4/h3-5H,2H2,1H3
InChIKey XNWFRZJHXBZDAG-UHFFFAOYSA-N

ACIDIFIED CLEAR WATER - Physico-chemical Properties

Molecular FormulaC3H8O2
Molar Mass76.09
Density0.965 g/mL at 25 °C(lit.)
Melting Point-85 °C
Boling Point124-125°C(lit.)
Flash Point115°F
Water SolubilitySOLUBLE
Solubility Very soluble in acetone, dimethylsulfoxide, and 95% ethanol (quoted, Keith and Walters, 1992).Miscible with N,N-dimethylformamide, ether, and glycerol (Windholz et al., 1983).
Vapor Presure6.17 mm Hg ( 20 °C)
Vapor Density2.62 (vs air)
AppearanceLiquid
Colorgreen cap
OdorMild ethereal.
Exposure LimitTLV-TWA skin 5 ppm (15.5 mg/m3)(ACGIH), 25 ppm (77.5 mg/m3) (OSHA).
Maximum wavelength(λmax)['λ: 213 nm Amax: 1.00',
, 'λ: 240 nm Amax: 0.20',
, 'λ: 260 nm Amax: 0.05',
, 'λ: 30
Merck14,6038
BRN1731074
pKa15.7(at 25℃)
Storage ConditionStore at +5°C to +30°C.
StabilityStable, but contact with air may lead to the formation of explosive peroxides. A peroxide test should be carried out before this material is used if it has been exposed to air for some time, especiall
Explosive Limit2.5-20%(V)
Refractive Indexn20/D 1.402(lit.)
Physical and Chemical PropertiesColorless transparent liquid with pleasant odor.
melting point -85.1 ℃
boiling point 125 ℃
relative density 0.9647
refractive index 1.4024
flash point 46.1 ℃
solubility in water, ethanol, diethyl ether, glycerol, acetone, N,N-dimethylformamide miscible.
UseUsed as coating solvent, penetrant, levelling agent and organic synthesis intermediate, also used as an additive for jet fuel

ACIDIFIED CLEAR WATER - Risk and Safety

Risk CodesR60 - May impair fertility
R61 - May cause harm to the unborn child
R10 - Flammable
R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
R39/23/24/25 -
R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed.
R11 - Highly Flammable
R35 - Causes severe burns
R34 - Causes burns
R36/38 - Irritating to eyes and skin.
Safety DescriptionS53 - Avoid exposure - obtain special instructions before use.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36/37 - Wear suitable protective clothing and gloves.
S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S23 - Do not breathe vapour.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
UN IDsUN 1188 3/PG 3
WGK Germany3
RTECSZC0110000
FLUKA BRAND F CODES10
TSCAYes
HS Code29332990
Hazard Class3
Packing GroupIII
ToxicityLD50 in rats, guinea pigs (mg/kg): 2460, 950 orally (Smyth); LC50 (7 hr in air) in mice: 4.6 mg/l (Werner)

ACIDIFIED CLEAR WATER - Upstream Downstream Industry

Raw Materials1-Butanol
Ethylene Oxide
Methyl alcohol
Ethyl Alcohol
Downstream Products1,2-Dimethoxyethane
nimodipine

ACIDIFIED CLEAR WATER - Nature

Open Data Verified Data

colorless transparent liquid, with pleasant odor, toxic. The relative density was 0.9647. Boiling Point (102. 391kPa) 125 °c, melting point -85.1 °c. Flash point 46.1 °c. Refractive index 4024. Spontaneous ignition point 288.3. Miscible with water, ethanol, ether, glycerol, acetone, N,N-dimethylformamide.

Last Update:2025-06-10 22:55:16

ACIDIFIED CLEAR WATER - Preparation Method

Open Data Verified Data

first put methanol into boron trifluoride-diethyl ether complex, slowly pass ethylene oxide under stirring to generate ethylene glycol monomethyl ether, and neutralize with alkali, distilled off excess methanol at atmospheric pressure and recovered, the desired product was distilled off under reduced pressure.

Last Update:2022-01-01 10:15:55

ACIDIFIED CLEAR WATER - Application

Open Data Verified Data

solvents for various oils and fats, nitrocellulose, alcohol-soluble dyes and synthetic resins, reagents for the determination of iron, sulfate and carbon disulfide, fast-drying solvents for enamel and varnish, diluents for coating, penetrants and levelling agents in the dye industry. It is also used in the formulation of sealants. As an intermediate in the production of organic compounds, ethylene glycol monomethyl ether is mainly used in the synthesis of acetate and ethylene glycol dimethyl ether. It is also a raw material for the production of BIS (2-methoxyethyl) phthalate plasticizers. In addition, it can also be used as an antifreeze additive for military air jet dyes.

Last Update:2025-08-19 16:24:40

ACIDIFIED CLEAR WATER - Safety

Open Data Verified Data

toxic, can cause anemia (giant red cell type), the emergence of new granular white blood cells and cause central nervous system disorders. Rat oral ld502460 mg/kg, mouse LC1500 x 10-6. The maximum allowable concentration in the air of the workplace is 80mg/m3. The operator should wear protective gear.
Packaged in glass or iron barrels of 4. 5L, 22. 5L or 240L per barrel. According to the provisions of the storage and transportation of toxic chemicals.

Last Update:2022-01-01 10:15:56

ACIDIFIED CLEAR WATER - Reference Information

pH range of acid-base indicator discoloration 5- 7 at 25°C
relative polarity 1
Henry's Law Constant(x 10-2 atm?m3/mol):4.41, 3.63, 11.6, 3.09, and 3.813 at 10, 15, 20, 25, and 30 °C, respectively (EPICS, Ashworth etal., 1988)
LogP-0.77 at 20℃
NIST chemical information information provided by: webbook.nist.gov (external link)
EPA chemical substance information information provided by: ofmpeb.epa.gov (external link)
Introduction ethylene glycol monomethyl ether (abbreviated as MOE), also known as ethylene glycol methyl ether, is a colorless transparent liquid, water, alcohol, acetic acid, acetone and DMF were miscible. As an important solvent, MOE is widely used as a solvent for various oils and fats, cellulose acetate, cellulose nitrate, alcohol soluble dyes and synthetic resins.
Application fast-drying solvents for enamel and varnish, coating diluents, penetrants and levelling agents in the dye industry, it is also used for printing ink and the preparation of sealant, the manufacture of plasticizer. In recent years, MOE is more and more used in the pharmaceutical industry, aviation jet fuel anti-icing agent, brake oil diluent, etc., and the dosage is increasing year by year. It is derived from the reaction of ethylene oxide with methanol.
preparation CN201110440309.9 provides a preparation method of ethylene glycol monomethyl ether, a chromatographic grade organic solvent with simple process, stable quality and high product purity. The steps are as follows: (1) the raw material ethylene glycol monomethyl ether is adsorbed through an adsorption column equipped with an adsorbent at a flow rate of 30mL-100mL/min; (2) step (1) the effluent of ethylene glycol monomethyl ether after adsorption is added with 2,4 dinitrophenylhydrazine with a weight ratio of 0.1% and stirred for 1H ~ 2H, then passed through a drying column equipped with a desiccant, and the water content after drying is controlled at less than or equal to 0.05%; (3) the ethylene glycol monomethyl ether dried in step (2) is put into a rectification kettle for rectification, and calcium hydride is added in the kettle, and the amount is 0.1-0.3% of the weight ratio of ethylene glycol monomethyl ether, the bottom temperature of the rectification kettle is 180~300 ℃, the liquid temperature in the kettle is 130~150 ℃, the top temperature is 124 ℃, and the reflux ratio is controlled to 10: 2~8, the reflux time is 2 to 4 hours, and the filtrate is a chromatographic grade ethylene glycol monomethyl ether by filtering through a micropore filter after rectification.
Use used as solvent, penetrant, levelling agent and organic synthesis intermediates, also used as an additive for jet fuel
2-methoxyethanol, also known as ethylene glycol monoether, is an intermediate of the herbicide ethersulfuron, and is also a solvent for various oils and fats nitrocellulose and synthetic resins.
The product is used as a solvent for various oils and fats, lignin, nitrocellulose, cellulose acetate, alcohol soluble dyes and synthetic resins; A reagent for the determination of iron, sulfate and carbon disulfide, a diluent for coating, and used in the packaging and sealing of cellophane, quick-drying varnish and enamel. It can also be used as a penetrating agent and leveling agent in the dye industry, or as a plasticizer and brightener. As an intermediate in the production of organic compounds, ethylene glycol monomethyl ether is mainly used in the synthesis of acetate and ethylene glycol dimethyl ether. It is also a raw material for the production of BIS (2-methoxyethyl) phthalate plasticizers. Ethylene glycol monomethyl ether with glycerol and mixtures (Ether: glycerol = 98:2) is a military jet fuel additive, anti-icing and anti-bacterial corrosion. When ethylene glycol monomethyl ether is used as the anti-slurry agent for jet fuel, the general addition amount is 0.15%± 0.05%, it has good hydrophilicity, and hydrogen bonds are formed between the molecules of the hydroxyl group and the water in the oil in the fuel, in addition, the freezing point of itself is very low, thus reducing the freezing point of water in the oil, so that the water can be precipitated into Frost, ethylene glycol monomethyl ether is also an anti-microbial additive.
used as a reagent and solvent for the determination of iron, sulfate and carbon disulfide
analysis reagent, used for the determination of trace water in alcohols, saturated hydrocarbons, benzene, chloroform, pyridine, carbon tetrachloride and so on.
determination of iron; Sulfate and carbon disulfide reagents, used as a variety of oils and fats; Lignin; Nitrocellulose; Cellulose acetate; Alcohol-soluble dyes and synthetic resin solvents
production method is obtained by reacting ethylene oxide with methanol. Methanol was added to the boron trifluoride diethyl ether complex, and ethylene oxide was introduced at 25-30 °c under stirring. After passing, the temperature was automatically raised to 38-45 °c, and the resulting reaction solution was neutralized to pH = 8-9 with potassium hydrogen cyanide-methanol solution. Methanol was recovered, distilled, and the crude product was obtained by collecting the fraction before 130 °c. After fractionation, the 123-125 °c fraction was collected as the finished product. In industrial production, the reaction of ethylene oxide and anhydrous methanol at high temperature and high pressure, without catalyst, can obtain high yield of products.
The preparation method is to add methanol to the boron trifluoride ether complex, and add ethylene oxide at 25~300 ℃ under stirring. After passing, the temperature will automatically rise to 38~45 ℃, the resulting reaction solution was neutralized with potassium hydroxide methanol solution to pH = 8-9, methanol was recovered, distilled, and then subjected to fractional distillation to obtain the product.
category flammable liquid
toxicity grade poisoning
Acute toxicity oral-rat LD50: 2370 mg/kg; Oral-mouse LD50: 2560 mg/kg
stimulation data Skin-rabbits 463 mg/24 h mild; eye-rabbit 500 mg/24 h mild
explosive hazard characteristics explosive when mixed with air
flammability hazard characteristics flammable in case of open flame, high temperature and oxidant; combustion-induced smoke
storage and transportation characteristics The warehouse is ventilated and dried at low temperature; It is stored separately from the oxidant
extinguishing agent dry powder, dry sand, carbon dioxide, foam, 1211 extinguishing agent
Occupational Standard TWA 16 mg/m3; Tel 120 mg/m3
spontaneous combustion temperature 548 ° F.
toxic substance data information provided by: pubchem.ncbi.nlm.nih.gov (external link)
immediate life-and health-threatening concentration 200 ppm
Last Update:2024-05-07 11:42:14
ACIDIFIED CLEAR WATER
Supplier List
CHEMBSF (Shanghai) Biomedical Technology Co., Ltd
Spot supply
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: 021-60556179
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
Jiangsu Pules Biotechnology Co.,Ltd.
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: 0513-66814854
Email: pules.cn@gmail.com
Mobile: +86-17551318830
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: +86-17505207175
Email: 3787852685@qq.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ message
Wechat: chemical6666
Nantong Reform Petro-Chemical CO., LTD.
Spot supply
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: +86-13776910623
Email: r@reformchem.com­
Mobile: +86-13776910623
QQ: 3785839865 Click to send a QQ messageSend QQ message
Wechat: chemical6666 
Shandong Xinhe new material Co .,Ltd
Spot supply
Product Name: 2-Methoxyethanol Visit Supplier Webpage Request for quotation
CAS: 109-86-4
Tel: 15662672320
Email: 2360124261@qq.com
Mobile: 15662672320
QQ: 2360124261 Click to send a QQ message
Wechat: 15662672320
WhatsApp: 15662672320
Shanghai Amole Biotechnology Co., Ltd.
Spot supply
Product Name: Ethylene glycol monomethyl ether Visit Supplier Webpage Request for quotation
CAS: 109-86-4
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365 Click to send a QQ message
Wechat: 18916960931
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: 2-methoxyethanol Visit Supplier Webpage Request for quotation
CAS: 109-86-4
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: 2-Methoxyethanol Visit Supplier Webpage Request for quotation
CAS: 109-86-4
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
CHEMBSF (Shanghai) Biomedical Technology Co., Ltd
Spot supply
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: 021-60556179
Email: 18721521379@163.com
Mobile: +86-18721521379
Wechat: 18721521379
Jiangsu Pules Biotechnology Co.,Ltd.
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: 0513-66814854
Email: pules.cn@gmail.com
Mobile: +86-17551318830
JIANGSU BSECHEM CHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: +86-17505207175
Email: 3787852685@qq.com
Mobile: +86-17505207175
QQ: 3787852685 Click to send a QQ message
Wechat: chemical6666
Nantong Reform Petro-Chemical CO., LTD.
Spot supply
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: +86-13776910623
Email: r@reformchem.com­
Mobile: +86-13776910623
QQ: 3785839865 Click to send a QQ messageSend QQ message
Wechat: chemical6666 
Shandong Xinhe new material Co .,Ltd
Spot supply
Product Name: 2-Methoxyethanol Visit Supplier Webpage Request for quotation
CAS: 109-86-4
Tel: 15662672320
Email: 2360124261@qq.com
Mobile: 15662672320
QQ: 2360124261 Click to send a QQ message
Wechat: 15662672320
WhatsApp: 15662672320
Shanghai Amole Biotechnology Co., Ltd.
Spot supply
Product Name: Ethylene glycol monomethyl ether Visit Supplier Webpage Request for quotation
CAS: 109-86-4
Tel: 400-968-2212
Email: 3623107365@qq.com
Mobile: 18916960931
QQ: 3623107365 Click to send a QQ message
Wechat: 18916960931
SHANGHAI ACMEC BIOCHEMICAL TECHNOLOGY CO., LTD.
Spot supply
Product Name: 2-methoxyethanol Visit Supplier Webpage Request for quotation
CAS: 109-86-4
Tel: +86-400-900-4166
Email: product@acmec-e.com
Mobile: +86-18621343501
QQ: 2881950922 Click to send a QQ message
Wechat: 18621343501
WhatsApp: +86-18621343501
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: 2-Methoxyethanol Visit Supplier Webpage Request for quotation
CAS: 109-86-4
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
Hefei TNJ Chemical Industry Co.,Ltd.
Product Name: 2-Methoxyethanol Request for quotation
CAS: 109-86-4
Tel: 0086-551-65418684
Email: sales@tnjchem.com
     info@tnjchem.com
Mobile: 0086 189 4982 3763
QQ: 2881500840 Click to send a QQ message
Wechat: 189 4982 3763
WhatsApp: 0086 189 4982 3763
Product List: View Catalog
View History
ACIDIFIED CLEAR WATER
Raw Materials for ACIDIFIED CLEAR WATER
1-Butanol
Ethylene Oxide
Methyl alcohol
Ethyl Alcohol
Downstream Products for ACIDIFIED CLEAR WATER
1,2-Dimethoxyethane
nimodipine
  • Home
  • Product Category

© 2015, 2023 ChemBK.com All Rights Reserved | Build: 20230617001